Welcome to my musings on whatever topic catches my eye, plus stories, recipes, handyman tips, welding, photography, and what have you. Oh, and analog/digital hardware design, and software. Please comment on the blog post so everyone who visits can see your comments.

Tag: protective

High-Performance Masks


Example high-performance mask
High-Performance Mask

High-performance masks are made to a specification that significantly exceeds the filtration efficiency of industry standard N95 masks. They deliver twice the filtration efficiency, and on particles down to 10 nanometers, which exceeds NIOSH N95 requirements by a factor of ten. All masks are equipped with a robust non-springy nose wire that can be shaped to seal to your face and nose.

If you want a reusable mask that looks nice and outperforms industry standard masks, you have found it here. They look the same as the standard masks but weigh slightly more because they contain three layers.

How do these masks work? In April of 2020, six researchers decided to collect samples of numerous fabrics used to make reusable masks and measure their filtration efficiency with the same equipment used to test industry standard masks like the N95. Since the topic here is viruses, the researchers enhanced the testing setup with a particle generator producing particles down to just 10 nanometers in size, making the test exceptionally demanding. (A Covid-19 virus ranges from 80 to 100 nanometers in size.)

Cotton, flannel, silk, and other materials were tested at 1, 2, and 4 layers, and then in various combinations. The researchers expected a cotton/silk combination to perform the best because of the electrostatic interaction between the two materials. Cotton/silk showed 92 percent efficiency. Howver, the researchers discovered that cotton plus 90/10 chiffon performed even better, reaching 97 to 98 percent efficiency.

This work appears in a peer reviewed scientific paper published by the American Chemical Society here:

https://pubs.acs.org/doi/10.1021/acsnano.0c03252

High-performance masks are made with an outer layer of high thread count cotton, an inner layer of 90/10 chiffon, and a comfortable inner layer of cotton muslin like the standard masks.

NOTE: August 2, 2023 I stopped making masks because demand dropped off. If or when another epidemic appears I will resume producing them.

Masks

The Covid-19 pandemic has kept me plenty busy. I apologize for not posting more often. One thing that’s kept me very busy is the making of masks, which are available on eBay.

These are top-quality masks with a comfortable muslin inner liner and outer material of high density cotton in various styles. Ear bands are comfortable 1/4-inch elastic.

Masks are equipped with a 6-inch wide padded annealed copper nose wire to conform the mask to the shape of your nose and face. This stops leakage and fogging of eyeglasses, and improves filtration effectiveness.

Please take a look at them here: https://www.ebay.com/itm/254577982386

© 2024 Shuttersparks

Theme by Anders NorenUp ↑

Find me on Mastodon